Loading A5 Or Statement Paper Sizes - Lexmark W850dn User Manual

Notes:
Load sizes larger than A4 in the short-edge orientation.
•
Make sure the paper is below the max fill line located on the edge of the paper tray. Overloading the tray
•
can cause paper jams and possible printer damage.
Long-edge orientation
5
Make sure the paper guides are secure against the edges of the paper.
6
Insert the tray.
7
If the paper type you loaded differs from the type that was previously loaded in the tray, then change the Paper
Type setting for the tray.

Loading A5 or Statement paper sizes

The printer trays cannot distinguish between A5- (148 x 210 mm) and Statement-size (139.7 x 215.9 mm) paper when
both sizes are loaded in the printer trays. From the Size Sensing menu, specify which size you want the printer to
detect. Load either A5- or Statement-size paper in the paper trays, but not both.
Note: The multipurpose feeder does not use auto-size sensing and can support both A5- and Statement-size print
jobs. The Size Sensing setting does not affect the multipurpose feeder settings.
1
Load either A5- or Statement-size paper in a paper tray.
2
Turn the printer off.
3
Press and hold and the right arrow button while turning the printer on.
Loading paper and specialty media
46
Short-edge orientation