Network/Ports Menu - Lexmark W850dn User Manual

Menu item
Print Fonts
PCL Fonts
PostScript Fonts
Print Directory
Note: Only appears when there is an
installed/mounted flash or disk device.
Asset Report
Print Demo

Network/Ports menu

Active NIC menu
Menu item
Active NIC
Auto
<list of available network cards>
Standard Network or Network <x> menus
Note: Only active ports appear in this menu; all inactive ports are omitted.
Menu item
PCL SmartSwitch
On
Off
Description
Prints a report in English of all the fonts available for the printer language
currently set in the printer
Note: A separate list is available for PCL and PostScript emulations. Each
emulator report contains print samples and information about the language's
available fonts.
Prints a list of all the resources stored on an optional flash memory card or printer
hard disk
Notes:
Job Buffer Size must be set to 100%.
•
The optional flash memory or printer hard disk must be installed correctly
•
and working properly.
Prints a report containing asset information including the printer serial number
and model name. The report contains text and UPC barcodes that can be
scanned into an asset database.
Prints a test page from the selected print media source.
Description
Notes:
Auto is the factory default setting.
•
This menu item appears only if an optional network card is installed.
•
Description
Sets the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language
Notes:
On is the factory default setting.
•
When the Off setting is used, the printer does not examine incoming data.
•
When the Off setting is used, the printer uses PostScript emulation if PS
•
SmartSwitch is set to On. It uses the default printer language specified in the
Setup menu if PS SmartSwitch is set to Off.
Understanding printer menus
88