Page 5
3. Put on the canopy and secure with the 4. Setup is done.Follow below instructions latch. to finish adjustment before start flying the vehicle. Center Control Surfaces NOTE: Keep the transmitter power off until you finish the checking of the control surfaces.
Gyro System Calibration 1.Turn the throttle stick to min position. 2.Power on the transmitter and the receiver. 3.Do NOT unlock the throttle. 4.Keep the sticks as above picture for several seconds. 5.When you hear a “beep” sound, it means the gyro system is calibrated based on the horizontal level you are keeping it.
Need help?
Do you have a question about the RANGER400 and is the answer not in the manual?
Questions and answers