Card Stock - Lexmark Optra E312 User Manual

For occasional label printing, use paper labels designed
Labels
for laser printers. You can feed labels one at a time from
the manual feeder, or you can load up to 10 labels in the
automatic paper feeder.
When printing on labels:
For occasional printing on index Bristol or tag card

Card stock

stock, feed 1 card at a time in the manual paper feeder.
Use card stock with a maximum weight of 163 g/m
and a minimum size of 76.2 x 127 mm (3 x 5 in.).
• Load envelopes vertically, flap side down so the
stamp area is in the top left corner.
• Adjust the left and right paper guides to fit the
width of the envelopes.
• Test the print quality before buying large
quantities of labels.
• Use labels with a pressure of 25 psi that can
withstand temperatures of 200°C (392°F) without
releasing hazardous emissions. For more
information on label printing, refer to the Card
Stock & Label Guide on the CD.
• Do not print a large number of labels
continuously.
• Do not use labels that have exposed adhesive on
the sheets.
Paper types and sizes
2
29