Wired Controller - Gree Slim Duct B Series Owner's Manual

WIRED CONTROLLER (XE72)
1 Symbols on LCD
1.1 Outside View of the Wired Controller
Fig. 1 Outside View of the Wired Controller
1.2 LCD of the Wired Controller
Fig. 2 LCD of the Wired Controller
DISCLAIMER
All functions are not available for
this unit.
Instruction of Display
No. Display
Automatic mode (under auto mode, the indoor unit will
1. Auto
select its operating mode according to the variation of room
temperature)
2. Cool Cooling mode
3. Dry
Dry mode
4. Fan
Fan mode
5. Heat Heating mode
6. Sleep Display when sleep function is set
7. Fresh air
This function is unavailable for this unit
8. Quiet
Display when sleep function is set
9. Health This function is unavailable for this unit
10. 46°F Vacation mode
Display when 46°F Vacation mode is set
11. I-DEMAND
Display when I-DEMAND function is set
12. WiFi Display when WiFi function is set
13. Lock-out Lock-out status, display when lock-out function is set
14. Up & down swing
Display when up and down swing function is set
15. Follower wired controller
Icon of follower controller, it will display when follower wired
controller is set (this function is unavailable for this unit)
The fan speed set currently (including auto, low, medium low,
16. Fan speed
medium, medium high, high, and turbo)
This function is unavailable for this unit
17. No card
Display when left and right swing function is set
18. Left & right swing
Display when X-fan function is set
19. X-fan
20. Temperature It will display the setting temperature
This function is unavailable for this unit
21. E-heater
Memory status (After power failure and re-energizing the
22. Memory
unit, it will resume to ON/OFF status of unit before the power
failure)
23. Clean Filter washing reminder (this function is unavailable for this
unit)
24. Save Display when energy-saving function is set
25. Defrost
Defrosting status
26. Timer
Display when timer status is set
27. Shield
Shielding status
S LIM DU C T B S E R I ES OW N E RS M A N UA L - IN DOOR U N IT | 9