General Information Scope Of Supply; Warranty; Structure And Function - Burkert 2080 Operating Instructions Manual

general infOrmaTiOn
scope of supply
Check immediately upon receipt of the delivery that the con-
tents are not damaged and that the type and scope agree
with the delivery note and packing list.
If there are any discrepancies, please contact us immedi-
ately.
germany
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel.: +49 (0)7940 - 10 91 111
Fax: +49 (0)7940 - 10 91 448
E-mail: info@de.burkert.com
international
Contact addresses can be found on the final pages of the
printed operating instructions.
And also on the internet at:
www.burkert.com Bürkert
english
8

sTrucTure and funcTiOn

Type 2080
modularity
The valve is modular in design and can be supplied with
different media connections (also customized) and actuator
versions according to the application case. It can be used
individually and also in blocks.
english
10
Company Locations

Warranty

This document contains no promise or guarantee. Please
refer to our general terms of sales and delivery. The warranty
is only valid if the device valve Type 2080 is used as intended
in accordance with the specified application conditions.
The warranty extends only to defects in the Type
2080 and its components.
We accept no liability for any kind of collateral
damage which can occur due to failure or malfunc-
tion of the device.
information on the internet
The operating instructions and data sheets for Type 2080
can be found on the Internet at:
www.burkert.com Documentation
Type 2080
The complete documentation is also available on CD which
can be ordered by quoting part no. 804625
structure
The valve consists of a pneumatically actuated piston actuator
with return spring, a stainless steel body and PTFE bellows.
The bellows are used to separate media. If the installation
location is appropriate, the valve is self-draining.
The materials used and the inner contours facilitate cleaning
(CIP/SIP).
The pneumatic actuator must be controlled externally via a
pilot valve or a valve island.
Bolts for attaching the actua-
tor to the body
Flange Threaded port Welded end
G 3/8
Media connections
Type 2080
Manuals / Approvals
english
9
Pilot air connections
Threaded ports G 1/8
Connection CF B (NO)
Connection CF A (NC)
Notch for monitoring of
bellow leakage
english
11