5.
Place the removed power supply in an antistatic bag.
Connecting the power cord
CAUTION:
• Provide a circuit breaker for each power cord.
• Before connecting the power cord, make sure the circuit breaker on the power cord is turned off.
Table2-7 Power cord connection procedures at a glance
Switch model
FS5100-8S-PWR-EI
FS5100-12S-EI
FS5100-12MS-EI
FS5100-12S-PWR-EI
FS5100-12MS-PWR-EI
FS5100-20MS-EI
FS5100-20MS-PWR-EI
FS5100-52F-EI-PS
Connecting the AC power cord for the fixed AC power supply
1.
Connect the plug of the AC power cord to the AC-input power receptacle on the switch. See
Figure2-27.
2.
Use a cable tie to secure the power cord to the handle near the AC power receptacle. See
Figure2-28.
3.
Connect the other end of the power cord to an AC power source.
Figure2-27 Connecting the AC power cord for the fixed AC power supply (1)
Available power source
AC power source
Removable power supply
2-26
Connection procedure reference
Connecting the AC power cord for the fixed
AC power supply
Connecting the power cord for a
PSR920-54A-B power supply