urmet domus FD-060-001 Quick Start Manual

Oem keypad used in stainless steel intercom panels

KEYPAD-OEM (FD-060-001)

(OEM keypad used in Urmet stainless steel intercom panels)

Quick start guide

Note there are NO DEFAULT CODES in the KEYPAD-OEM (FD-060-001)

keypad and Urmet do not have any record of the Engineer's Password.

If you do not know the Engineer's Password then it will be necessary to gain

access to the rear of the keypad.

Table of Contents

Need help?

Do you have a question about the FD-060-001 and is the answer not in the manual?

Page 1 (OEM keypad used in Urmet stainless steel intercom panels) Quick start guide Note there are NO DEFAULT CODES in the KEYPAD-OEM (FD-060-001) keypad and Urmet do not have any record of the Engineer’s Password. If you do not know the Engineer’s Password then it will be necessary to gain...
Page 2 Step 1 – Program an Engineer’s Password Move the EXPL/PROG jumper to the PROG position – In the following example a 6-digit Engineer’s Password of 123456 will be programmed – Engineer’s Password Group 123456 Confirm Number of digits in Engineer’s Password is stored in memory the Engineer’s position 1...
Page 3 Step 3 – Program the Relay Time In the following example Relay 1 time will be programmed to 5 seconds – Relay 1 Confirm 123456 Engineer’s Relay Password time Wait 30 seconds for the keypad to exit from the programming mode. In summary press 123456 31 04 # then wait 30 seconds Tel 01376 556010 www.urmet.co.uk...