Hole Punching To An Output Bin - Lexmark X644E User Manual

Tray Mapping 8 to Tray 1 Hp to IPDS Number 4.
(When IPDS Number 4 is the requested source in the IPDS data stream, pages are pulled from the printer
physical Tray 1 and all pages are hole punched.)

5.3.2 Hole Punching to an Output Bin

Hole punching may be performed on paper routed to any optional finisher output bin. Hole punching to
an output bin is specified using the printer's Option Card Menu > IPDS MENU > MAP OUTPUT
BINS menu. See MAP OUTPUT BINS Menu Options on page 40 for additional information. A
combination of the printer physical output bin and the IPDS data stream specified output bin is used to
specify hole punching.
Example 1 - To have all pages stacked in a finisher bin hole punched (Default settings are assumed in this
example. Check the finishing support table on page 51 to determine the bins that support hole punch.)
To have all pages stacked in an output bin hole punched, specify the following in the IPDS MENU >
MAP OUTPUT BINS menu:
Finisher Physical Bin 1
1. Select Bin Mapping 1
2. Select Output Bin 1 Hp
3. Select IPDS Number 1
When the requested output bin number is 1 in the IPDS data stream, pages are hole punched and stacked in
the finisher physical output bin selected.
Example 2 - To have selected pages stacked in an output bin hole punched (Default settings are assumed
in this example. Check the finishing support table on page 51 to determine the bins that support hole
punch.)
To have some pages punched and some pages not punched as they are stacked in the finisher physical
output bin, specify the following in the IPDS MENU > MAP OUTPUT BINS menu:
Finisher Physical Bin 1
1. Select Bin Mapping 1
2. Select Output Bin 1
3. Select IPDS Number 1
4. Select Bin Mapping 4
5. Select Output Bin 1 Hp
6. Select IPDS Number 2
Note: IPDS Number 1 is the default IPDS data stream output bin.
When IPDS Number 1 is the requested output bin in the IPDS data stream, pages are stacked in the
finisher physical output bin and are not hole punched.
When IPDS Number 2 is the requested output bin in the IPDS data stream, pages are stacked in the
finisher physical output bin and are hole punched.
Finisher Physical Bin 2
1. Select Bin Mapping 1
2. Select Output Bin 2 Hp
3. Select IPDS Number 1
Finisher Physical Bin 2
1. Select Bin Mapping 1
2. Select Output Bin 2
3. Select IPDS Number 1
4. Select Bin Mapping 4
5. Select Output Bin 2 Hp
6. Select IPDS Number 2
67