Dual Staple (Ipds Edge Stitch With 2 Staples) - Lexmark X644E User Manual

5.2.1.2.2 Dual Staple (IPDS Edge stitch with 2 staples)

Parameters in the printer file
Edge stitch
Reference edge............ *LEFT, *TOP or *DEVD
Reference edge offset..... *DEVD
Number of staples......... *DEVD or 2
Staple offsets............ *DEVD
Two staples are placed on the left or top reference edge of the paper.
*TOP must only be used with short edge fed paper.
*LEFT must only be used with long edge fed paper.
An invalid staple position parameter may cause an exception to be reported to the host.
The "Reference edge offset", "Number of staples", and "Staple offsets" parameters are not supported, and
are ignored if set to other values.
Drawings of staple placement
*LEFT
*DEVD
*TOP
*DEVD
TEXT
Text
Text text text
Text is shown with 0
degree rotation
specified in IPDS job
Long-edge fed paper,
leading edge
Text is shown with 0
degree rotation
specified in IPDS job
Short-edge fed
paper, leading edge
59