Finishing functions for Lexmark C935, X940e MFP, X945e MFP, Lexmark X850e MFP, X852e
MFP, and X854e MFP (Note 3).
The finishing functions do not apply to all paper sizes. When a function can not be applied to a specific
paper, the job will print but finishing functions will not be performed.
Function/
Hole
Support with
Punch
Optional
Finisher
Lexmark
Finisher
C935, X940e
Physical
MFP, X945e
Bin 2
MFP,
Lexmark
X850e MFP,
X852e MFP,
X854e MFP
* - 20 lb. plain letter paper
– Indicates not supported.
Note 1: Letter and A4 paper must be loaded Long Edge Fed (LEF) for Double Dual stapling to be
performed.
Note 2: Two optional finisher units are supported. The Standard Finisher has two bins and does not support
Center Fold-in or Saddle staple (Saddle stitch-in). The Advanced Finisher supports all listed
finishing functions. Letter and A4 paper must be loaded Short Edge Feed (SEF) for Center fold-in
and Saddle stitch-in to be performed.
Note 3: Advanced finishing functions for the Lexmark X850e MFP, X852e MFP, and X854e MFP are
supported on base printer code LC3.BE.P339 (or greater) with IPDS code 3.01-01257 (or greater).
52
Offset
Staple
Stacking
Bin
Finisher
Finisher
Physical
Physical
Bin 2
Bin 2
Staple
Maxi-
position
mum
(Note 1)
Staple
Packet
Size*
Front
50
Rear
Sheets
Dual
Double Dual
Center
Saddle
Fold
Staple
(Note 2)
(Note 2)
Finisher
Finisher
Physical
Physical
Bin 3
Bin 3
(Advanced
(Advanced
Finisher
Finisher
only)
only)