10 Command Reference
10.1 XOA Print Quality Control
Monochrome printers support the Execute Order Any State (XOA) Print Quality Control command. This
command specifies the print quality at which jobs will be printed on monochrome printers. Specifying
lower print quality levels can save toner. Color printers ignore the Print Quality Control command when it
is received. The following table gives the Quality Level value range.
The Toner Saver option in the IPDS MENU affects the processing of this command. See Toner Saver on
page 23 for more information.
Print Quality Control Quality Level Values
Quality Level
Description
(Byte 2 Value)
X'01' – X'55'
Lowest print quality. Best toner saving. These quality level settings correspond to
setting the printer menu's Toner Darkness option to a value of one (in Settings
> Quality Menu).
X'56' – X'AA'
Use the operator panel value specified in the printer menu's Toner Darkness
option (in Settings > Quality Menu ).
X'AB' – X'FE'
Factory default setting. Yields the best print quality with no toner saving. Check
your printer documentation to determine the factory default value.
X'FF'
Use the operator panel value specified in the printer menu's Toner Darkness
option (in Settings > Quality Menu).
The last print quality setting is saved across sessions when the printer and host settings are set correctly to
allow resources to be saved in the printer.
The following Negative Acknowledgment is returned by printers that support the XOA Print Quality
Control command.
Exception
X'0292..02'
Description
Invalid XOA Print Quality Control parameter. An invalid
quality level value of X'00' was received.
Action Code
X'01'
79