Installation Of Upper Part - Electrolux DC6-8HP Q Series Installation Manual

10

4.3 Installation of upper part

Before lifting the upper part into place
• Unscrew the lamp lens and the lamp from the upper part to prevent these from being damaged during setup.
• Turn the hose nipple 90 degrees to protect this during setup as well.
Upper part as seen from behind
1 Hose nipple
2 Lamp
3 Door cable
Lower part with door cable connected
The fully assembled right door has an installed door cable (3) connected to the control panel in the door.
Bend it away so it is not damaged when the upper part is placed on the lower part.
The cable is connected to the terminal block as described in the "Electrical connection" section later in this manual.
Installation manual
1 2
fig.W01387
fig.W01374A