Electrolux DC6-8HP Q Series Installation Manual page 11

The installation kit contains four air tubes that are used when installing the upper part.
• Remove the cover plugs (A) and insert the air tubes (B) at the ends. Twist the air tubes so they lock into place.
• Carefully lift the upper part onto the lower part and secure it with the four provided M8x20 screws and the two 4 x
9.5 SHEETtracs screws for the air duct as illustrated.
• Pull out the air tubes and refit the cover plugs.
• Reinstall the lamp and lamp lens.
After setup, store the air tubes at a suitable spot for future use.
1 Fastening screw for upper part M8x20 (4)
2 Fastening screw 4x9,5 SHEETtracs for air duct (2)
3 Sealing strip
4 Air duct
Installation manual
1
2
B
A
B
A
3
4
11
fig.W01375A