Table of Contents
Advertisement
– well lit.
For the Customer's complete information, the residual risks remaining on the machine
are indicated below: such situations are deemed improper and therefore strictly
forbidden.
Residual risk
Slipping or falling
Burns/abrasions (e.g. heating
elements)
Electrocution
Sudden closing of the lid/door/
oven door (if present, depending
on the appliance type)
Tipping of loads
Mechanical safety characteristics, hazards
• The appliance does not have sharp edges or protruding parts. The guards for the
moving and live parts are fixed to the cabinet with screws, to prevent accidental access.
CAUTION
In case of a significant anomaly (e.g. short circuits, wires coming out of the
terminal block, motor breakdowns, worn electrical cable sheathing, smell of
gas indicating possible leakage, etc.) the operator must:
immediately deactivate the machine and disconnect all the supplies
(electricity, gas, water).
A.5
Safety signs to be placed near the machine area
Prohibition
8
Description of hazardous situation
The operator can slip due to water or dirt on the
floor
The operator deliberately or unintentionally
touches some components inside the machine
without using protective gloves
Contact with live parts during maintenance
operations carried out with the electrical panel
powered
The operator for normal machine use could
suddenly and deliberately close the lid/door/oven
door (if present, depending on the appliance type)
When handling the machine or the packing
containing it, using unsuitable lifting systems or
accessories or with the unbalanced load
Meaning
Do not remove the safety devices
Do not use water to extinguish fires (placed on electrical
parts)
Keep the area around the appliance clear and free from
combustible materials. Do not keep flammable materials in
the vicinity of the appliance
Install the appliance in a well-ventilated place to avoid the
creation of dangerous mixtures of unburnt gases in the
same room
Advertisement
Table of Contents
