Safety Procedures - Stratasys Objet24 Operator Training Manual

Risk of burns from:

Hot Surface
Block – 70°C

Heads - 75°C

UV socket
Do NOT touch these surfaces while they are hot.

Main Power Supply

High Voltage
UV Power Supply

UV Lamp Connectors

X-Axis Power Supply

Printer Computer Power Supply
Risk of Electric Shock
Ultra Violet Radiation from UV Lamps
Radiation
Always use protective eyewear when the printer cover is open.
Manufacturer : UN process supply INC.
No : I005-017orange

Moving Parts
4 Moving Axes - X axes, Y axes, Z axes ,T axes (wiper)

UV Fans

Pumps

Printing materials (resins) are flammable – Do not expose them to flames, heat or
sparks.
Handling

Keep resins away from food and drink.
Printing

Uncured resin is toxic - minimize direct contact with the skin to prevent irritation
Materials
and other health hazards. Prolonged contact may cause burns.

Always wear protective gloves.

If respiratory irritation occurs, expose the victim to fresh air immediately.

If uncured resin comes in contact with the eyes, flush immediately with large
First Aid for
amounts of water for 15 minutes and seek medical attention.
Working with

When handling resins or material containers, wear protective goggles to
Resins
prevent uncured resin from splashing into the eyes.

If uncured resin comes in contact with the skin, wash the area immediately with
soap and cool water.

Be familiar with the locations and use of safety equipment.

Do not use broken equipment. Machinery with moving parts must have a working
General Safety
safety interlock, and a protective cover over the moving parts.

Rules
Do not open the cover while printer is operating.
If open, do not stare at the UV light and use protective eyewear to prevent exposure to
UV light.

Safety Procedures