Table of Contents
Advertisement
Replacing the Odor Filter
What: if the printer exhaust is not connected to an external ventilation system,
a built‐inactivated‐carbon filter removes odors.
Note:
if the printer exhaust is connected to an external ventilation system, the odor filter should not be installed.
Why: to remove odors.
When: Once a year, if needed replace before.
How:
•
Locate the filter drawer at the rear of the printer and pull it.
•
Remove the used filter and install a new one.
32
STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY
Advertisement
Table of Contents
