Application Range - CAMPAGNOLA ENERGY4 Use And Maintenance Manual

WARNING!
When using 12 V tools, the "ESC" intelligent switch (see par. 4.8) must be in position 1 "ON").
6.4

Application range

WARNING!
When using the generator, make sure the total load is within rated output of a generator. Otherwise, generator
damage may occur.
AC
Power factor
lkW
WARNING!
Application power indicates when each device is used alone.
•
EXAMPLE:
Generator rated output
Frequency
The overload indicator light ② it lights up when the total power exceeds
WARNING!
the data on the plate (see chap. 10).
WARNING!
- Do not overload. The total load of all electrical appliances appliance must not exceed the supply range of the
generator. Overloading will damage the generator.
- When supplying precision equipment, electronic controllers, PCs, Electronic computers, microcomputer
based equipment or battery chargers, keep the generator a sufficient distance away to prevent electrical inter-
ference from the engine. Also ensure that electrical noise form the engine does not interfere with any other
electrical devices located near the generator.
- If the generator is to supply medical equipment, advice should first be obtained from the manufacturer, a
medical professional or hospital.
- Some electrical appliances or general-purpose electric motors have High starting currents, and cannot there-
fore be used, even if they lie within the supply ranges given in the above table. Consult the equipment manu-
facturer for further advice.
Use and maintenance manual – Translation of
original Instruction Rev.: 01, Date 02/11/2022
1 0.8- 0.95
<=l 000W <=800W
Power factor
1,0
AC
0,8
DC ---
0.4-0.75 (Efficiency 0,85)
<=400W
1.000 w
<= l.000W
<= 800W
700W(12Vx58.3A)
DC
Rated voltage 12V
Page 35