Environment Concerns; Installation - Electrolux ESF 2200 DW User Manual

14 electrolux
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
If the hot water comes from alternative
sources of energy, (e.g. solar panels,
photovoltaic panels and aeolian), use a

ENVIRONMENT CONCERNS

The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be

INSTALLATION

WATER DRAIN CONNECTION
• Connect the water drain hose into a drain
pipe with minimum diameter of 40 mm
• Put the water drain hose directly into the
sink. Use the special plastic support
The water drain hose must be less than
750 mm from the bottom of the appliance
to prevent problems during the draining
phases.
Remove the sink plug when the appliance
drains the water to prevent that the water
goes back into the appliance.
The extension for the water drain hose
must not be longer than 2 m. The internal
Place settings
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
Recycle the materials with the symbol
Put the packaging in applicable containers
to recycle it.
max. 750 mm
diameter must not be smaller than the di-
ameter of the drain hose.
If you connect the water drain hose to a
trap spigot under the sink, remove the plas-
tic membrane (A). If you do not remove the
membrane, remaining food can cause a
blockage in the drain hose spigot
hot water supply to decrease energy
consumption.
6
.