Lower Freezer Rails; Upper Back Panel - Viking VCSF136D Service Manual

Service Diagnostics and Procedures–Disassembly
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.

Lower Freezer Rails

To access:
1. Remove drawer (see freezer drawer section,
page 44).
2. Remove securing screws and lower rails.
3. Reverse procedure to reinstall
© 2010 Viking Preferred Service
WARNING
Screws

Upper Back Panel

To access:
1. Open freezer door and remove shelves.
2. Remove upper back panel by pulling out at the
bottom and then down.
]
3. Reverse procedure to reinstall
Upper Back Panel
45