Emerson HF1160BQ02 Owner's Manual page 6

BP7272-4 HF1160.qxp_BP7272 9/10/15 9:44 PM Page 6
3.4
Separate, untwist and unkink the three 48" motor wires
and the safety cable, then route them through the center
hole in the motor cover.
Align the two holes in the motor cover with the threaded
holes in the motor yoke.
Secure the motor cover to the motor assembly by installing
two #8-32 x 1/4" pan head screws and two #8 external
tooth lockwashers (supplied) (Figure 4).
3.5
Route the three 48" motor wires and the safety cable
through the center hole in the ceiling cover and position the
ceiling cover over the motor yoke (Figure 5).
3.6
Route the three 48" motor wires and the safety cable
through the hanger ball/downrod assembly and seat the
downrod in the motor yoke (Figure 6).
3. Ceiling Fan Assembly
(Continued)
#8-32 x 1/4" PAN HEAD
SCREW
#8 EXTERNAL TOOTH
LOCKWASHER
MOTOR COVER
Figure 4
CEILING
COVER
MOTOR
YOKE
Figure 5
MOTOR WIRES (3)
HANGER BALL/
DOWNROD ASSEMBLY
MOTOR YOKE
Figure 6
6
SAFETY
CABLE
U.L. Model No.: HF1160-2