Emerson HF1160BQ02 Owner's Manual page 16

BP7272-4 HF1160.qxp_BP7272 9/10/15 9:44 PM Page 16
6.10
Carefully tuck all wires and wire connectors into the outlet
box and position the Wall Control onto the outlet box
(Figure 28).
6.11
Place the previously removed faceplate onto the Wall
Control.
Assemble the faceplate to the Wall Control using the two
previously removed 6-32 screws (Figure 29).
6.12
The Wall Control is supplied with a white and almond
knob. Select the knob that matches the color of existing
faceplate (Figure 30).
Press knob onto the shaft of the Wall Control.
To Complete Installation: Restore power at the main
Rotate knob counter-clockwise to the full OFF position.
fuse box or circuit breaker panel.
6. Wall Control Installation
(Continued)
POSITION THE WALL
CONTROL INTO THE
OUTLET BOX
WALL
CONTROL
WIRES TUCKED INTO
OUTLET BOX
Figure 28
PREVIOUSLY REMOVED
6-32 SCREWS (2)
Figure 29
KNOB
WALL CONTROL
Figure 30
16
PREVIOUSLY REMOVED
FACEPLATE
U.L. Model No.: HF1160-2