DISASSEMBLY PROCEDURE-Service panel
8. DISASSEMBLY PROCEDURE
8-1. Service panel
Procedures
1. Removing the service panel 1 (Figure 1-1)
(1) Remove the four service panel 1 mounting screws.
2. Removing the service panels 2 and 3 (Figure 1-2)
(1) Remove the five service panel 3 mounting screws.
(2) Remove the two service panel 2 mounting screws.
HWE1212A
Explanatory figure
Figure 1-1
Service panel 1
Service panel 3
Service panel 2
Figure 1-2
17