Network Configuration; Initializing Device - Dahua Technology IPC-HUM4231S-L4-0280B-S3 Quick Start Manual

2

Network Configuration

Device initialization and IP address setting can be finished with the ConfigTool or on web page. For
more information, see Web Operation Manual.
Device initialization is available on select models, and it is required for the first use or after the

device is reset.
Device initialization is available only when the IP addresses of the device (192.168.1.108 by

default) and the PC stay on the same network segment.
Plan useable network segment properly for the device.

The following figures are for reference only.

Initializing the Camera
Search for the device that needs to be initialized through ConfigTool.
1) Double-click ConfigTool.exe to open the tool.
2) Click Modify IP.
3) Select the searching way, and then click OK.
4) Select one or several uninitialized cameras, and then click Initialize.
Select the devices to be initialized, and then click Initialize.
If you do not provide an email address for password reset, you can reset the password only
through XML file.
Set and confirm the password of the devices, enter a valid email address, and then click Next.
Password setting
2
Quick Start Guide