Connects2 CAM-FD14 User Manual

Boot handle reversing camera for select ford vehicles

U s e r M a n u a l

CAM-FD14

APPLICATION

Ford Focus

2012 - 2014

The information provided in this document is subject to change without notice due to manufacturer

changes and/or improvements to the product/s. This instruction manual is based on documented data

and research. The manufacturer of this product cannot be held responsible for any changes made to

the vehicle by the manufacturer or damages that may occur through the installation of this product in

Boot Handle Reversing Camera

for select Ford Vehicles

DISCLAIMER

accordance with the steps outlined herein.

Connects2Vision

V1. 11/20

Table of Contents

Need help?

Do you have a question about the CAM-FD14 and is the answer not in the manual?

Page 1 Connects2Vision U s e r M a n u a l Boot Handle Reversing Camera CAM-FD14 for select Ford Vehicles APPLICATION Ford Focus 2012 - 2014 DISCLAIMER The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s.
Page 2 Please ensure you use the correct tools to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation of this product. TECHNICAL SUPPORT Connects2 want to provide a fast and suitable resolution should you encounter any technical issues.
Page 3 If camera feed is unresponsive, please uninstall the wiring and reinstall carefully in accordance with the above steps For further help and support, please contact us directly at support.connects2.com/tickets/technical and fill out a support ticket with the full details of your issue. www.connects2.com...
Page 4 WIRING DIAGRAM Connects2Vision www.connects2.com...