Moving The Cabinet - Dell S5000 Series Installation And Service Manual

3.7.

Moving the Cabinet

The cabinet is equipped with four swivel castors so that it can be easily rolled to
the location indicated on the Customer's floor plan.
Important If the cabinet is pre-equipped with servers and/or devices,
Required Tools
None
Procedure
1. Check that the two front and four feet are raised and allow the cabinet to
move freely.
2. Carefully guide the cabinet to its location.
3. Check required service clearance at the rear, front and sides of the cabinet.
4. Take care to leave sufficient access to raised floor cable cut-outs.
two people are required to roll it to the required location.
Chapter 3. Installing the Rack Cabinet 3-11