Dell S5000 Series Installation And Service Manual page 97

Chapter 6. Managing Power and Data Cables
Important ATTENTION: Please read carefully the safety instructions
Important Please refer to the documentation delivered with your
6.1. Routing Data Cables
Please refer to the documentation delivered with your server and/or device for
detailed cable management information.
C040
C040:
Power cables must NEVER be routed between cabinets.
Important GENERAL RECOMMENDATIONS
before you perform the procedures described in this
manual.
Multilingual Safety Notices Guide
server and/or device for detailed cable management
information.
CAUTION
.
Label all cables for easy identification.
.
Secure cables with appropriate fixtures.
.
Ensure that cables are clear of doors and panels.
.
Take care not to route cables in front of other servers or
devices.
.
When servers or devices are installed on slide rails:
Leave extra cable lengths for full mobility.
Route cables along cable arms and secure with
appropriate fixtures.
.
Check that the PDU is compliant with server and/or
device power requirements.
.
Route inter-cabinet data cables through the cable
openings at the rear of the cabinets.
Chapter 6. Managing Power and Data Cables 6-1