Table of Contents
Advertisement
_________________________________________________________________________________________________________
7
OPERATION
7.1
Description
After the radio and antenna system has been installed and the radio properly configured, the
radio can be placed into operation.
7.2
Remote Station (Airlink Mercury) CLI Operation
The basic functionality of the Airlink Mercury software operating on a remote radio can be
determined from the LEDs.
Further operational information can be obtained via the CLI as described in this section.
7.2.1 Remote Station CLI
The remote station CLI includes many features for manipulating key configuration parameters
however it is recommended that it be used primarily for obtaining measurement and status
information described as follows.
7.2.2 Basic CLI Use
Use SSH to login to Mercury admin user with the password. After a successful login, a banner
will be displayed as shown in Figure 7-1.
COM-00-21-03
Version No.: A
SECTION 7
OPERATION
Figure 7-1 CLI Basic Opening Screen Banner
7-1
OPERATION
OCTOBER 2021
Advertisement
Table of Contents
