Table of Contents
Advertisement
SOFTWARE UPDATES
_________________________________________________________________________________________________________
If the active partition is mtdblock5, the commands are as follows:
# flash_eraseall /dev/mtd6
# ubiformat /dev/mtd6 -f Mercury_Release_1.0.0c.ubi -s 512 -O 512
# boot2
# reboot
Radio will reboot and switch the active partition to mtdblock6.
newboot –r
New configuration files – This is a change to configuration files and can be done
locally or remotely as described in this document using Apollo or WinSCP
Specific details of software upgrades will be provided in the release package
COM-00-21-03
Version No.: A
8-2
OCTOBER 2021
Advertisement
Table of Contents
