Si001413EB
Step
2
Pull out the compressor
lead wires.
3
Pull out the overload
protector.
4
Remove the protection
bushing.
5
Pull out the electronic
expansion valve coil.
6
Remove the putty.
7
Heat up the 2 brazed
parts and remove the
electronic expansion
valve.
Removal Procedure
Procedure
V (yellow)
W (blue)
U (red)
Protection bushing
Electronic Expansion Valve
This is the view from the
back side.
Overload protector
(R23353)
Electronic
expansion
valve coil
(R20555)
Electronic
expansion
valve
Putty
Brazed part
(R20556)
Points
15