Akia Screens EDGE FREE CLR 2 Series User Manual

Ceiling light rejecting fixed frame screen

Advertisement

Product Description:
The EDGE FREE® CLR® 2 Series is a fixed frame projection screen that uses Akia's EDGE FREE® technology.
The EDGE FREE® design resembles a giant size flat panel TV display. The screen includes a bezel trim to further
enhance the frame appearance and absorb projector overshoot. An optional LED kit is available for backlighting.
The screen material included is our ISF Certified CLR® 2 (Ceiling Light Rejecting) which is a front projection
material designed for ultra and short throw projectors, precisely formulated for environments with minimal control of
overhead room lighting. Its multi-layer structure enhances picture brightness, maintain color purity, and improves
contrast levels in ambient light room environments. The CLR® 2 is best for family rooms, educational facilities,
conference rooms, house of worship or any applications in which incident light is a factor.
Screen Maintenance
Dust, dirt and scratches on the projection screen surface will affect the quality and performance of the projection
image. For optimal results we advise to pay attention to the following instructions.
1) Use a dry microfiber cloth or soft brush to remove dust from the screen's surface.
2) When cleaning, use a damp microfiber cloth with warm water to remove any marks.
3) Never rub or apply pressure when cleaning the surface
4) The screen material has a scratch-resistant layer to protect the material through many years of use.
Notes:The following precautions should always be followed to avoid damaging the material, which is not covered
under warranty.
▪ Don't touch the screen material with your bare hands to avoid leaving oil residue from fingertips.
Use gloves when handling the material.
▪ Don't point to the screen material with a fingertip or other sharp objects to prevent damage to the material.
Don't use acetone, benzene, alcohol and any other organic solvents to clean the screen material.
Using such chemicals will permanently damage the screen.
Qty
item
Part A.
Part B.
Part C.
10042022JA
1. Frame and Edge Trim Parts List
2 pcs
Main Frame Parts
vertical frame
½ horizontal frame
½ horizontal frame
www.akiascreens.com
EDGE FREE® CLR® 2 Series
Ceiling Light Rejecting Fixed Frame Screen
Qty
item
Part D.
Part E.
Part F.
USER'S GUIDE – V1.1
2 pcs
Edge Trim Parts
U-00232
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EDGE FREE CLR 2 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Akia Screens EDGE FREE CLR 2 Series

  • Page 1 EDGE FREE® CLR® 2 Series Ceiling Light Rejecting Fixed Frame Screen USER’S GUIDE – V1.1 Product Description: The EDGE FREE® CLR® 2 Series is a fixed frame projection screen that uses Akia’s EDGE FREE® technology. The EDGE FREE® design resembles a giant size flat panel TV display. The screen includes a bezel trim to further enhance the frame appearance and absorb projector overshoot.
  • Page 2: Hardware Parts List

    2. Hardware Parts List M4*4 D5*4 M4*4 D5*4 M4*4 M4*4 103” 123” Item Parts List Center Joints- M4 (bottom position) Center Joints-D5 (top position) Elbow Joints M4 (bottom position) Elbow Joints D5 (top position) Side cover Center Joints- M4 Side cover Elbow Joints M4 M4x7 Screws Spring Spring Hook...
  • Page 3: Frame Assembly

    Frame Assembly Step 1: Place the included soft padded EPE sponge sheet on a clean area where the screen will be assembled. Step 2: Position the pieces of the frame on the EPE sponge in the arrangement shown below Step 3: Insert center joint (a/b) connectors into one-half of the horizontal frame (B/C) and secure with the M4x7 screws (M) as shown in the illustration below.
  • Page 4 Screen Material Step 6: Put on the white gloves (p) and carefully unroll the screen material on a clean surface from the roller to the other side as shown below. The back side of the screen material should be placed upwards. Back side Back Side Front...
  • Page 5 Begin by first attaching the center points on both vertical (left/right) sides, steps 1-2. Then the center points on both horizontal (top/bottom) sides, steps 3-4. Once all center points have been secured, make sure the screen material is still within the marked areas before proceeding to attach the next springs. Continue attaching the rest of the springs to the material in the following order in steps 5-12.
  • Page 6 Edge Trim Installation ATTENTION: The back of the material has labels indicating the TOP and BOTTOM. The top edge trim piece with the logo should be installed at the top. The material is directional and will not accurately reflect if bottom side is projected on. Step 10: Place the edge trim frame pieces over each end of the frame.
  • Page 7: Notice To Installer

    Step 11: Install the angle cover (n) on each corner of the frame using the M4x4 screws (m). Note: The angle cover screws holes align with the screw holes on the elbow joint. Peel off the double-sided tape. Step 12: Install the springs (q) in each middle area to further support the bezel trim edge frame. Notice to Installer: Material Tip: Proper Projector Placement for CLR®2 CORRECT...
  • Page 8: Wall Installation

    Position the fixed frame screen onto the top wall brackets (fig 1) as shown below and push Step 14: down at the center of the top of the frame (fig 2) to secure. For Technical Support or an Akia Screens contact in your area, visit www.akiascreens.com U-00232 10042022JA www.akiascreens.com...

Table of Contents