PROAIM SR-SBP-02 Assembly Manual

Quantum magnetic shoulder rig w vct base plate

Quantum Magnetic Shoulder Rig w VCT

Base Plate

(SR-SBP-02)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

2 x Handles

Base Plate

2 x 15mm Dia, Length

200mm Long Female Rods

300mm Long Female Rods

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the SR-SBP-02 and is the answer not in the manual?

Page 1 Quantum Magnetic Shoulder Rig w VCT Base Plate (SR-SBP-02) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Quantum Magnetic Shoulder Rig Setup • Loosen the knob of the base plate and insert a 200mm long rod. • Then insert the second 200mm long rod and tighten it properly with the knob, as shown in the image. • Loosen the knob on the other side of the base plate and insert the 300mm long rod.
Page 3 • Then attach the second handle and tighten it properly. • By pressing the adjustment knob, the angle of the handle can be changed according to your requirement, as shown in the image. NOTE: It allows your camera set up to sit comfortably on your shoulders by eliminating the discomfort caused by the camera's weight on your shoulder during shooting.
Page 4 Mini), and many other camera models with interchangeable lenses. YOUR PROAIM QUANTUM SHOULDER RIG W VCT MOUNT ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.