Fan Motor / Fan Rotor - Daikin ATKC18RV2S Removal Procedure

Fan Motor / Fan Rotor

10.Fan Motor / Fan Rotor
Warning
Step
1 Remove the 2 screws
of the right side plate.
2 Lift the right side plate
and remove it.
3 Remove the screw and
remove the fan motor
fixing plate.
4 Loosen the screw of the
fan rotor.
5 Remove the fan motor.
16
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Fan rotor
Right side
plate
(R17682)
Fan motor fixing plate
(R11373)
Side face of rotor
(R18245)
(1) Insert the fan motor allowing
(2) Tighten the fan rotor screw
(3) If the fan rotor rotates
Fan motor
(4) If not, repeat the procedure
(R11375)
Si041255EH
Points
When reassembling the fan
motor and the fan rotor,
provide as much as 5 mm
(0.2 inch) of play between
the side face of the rotor and
the bottom frame.
Side face of
bottom frame
5 mm (0.2 inch)
(R18879)
(R9582)
for approx. 5 mm (0.2 inch)
of play.
until it stops. Then give the
screw one more turn.
appropriately, tighten the
screw completely.
from (1).
Removal Procedure