Swing Motors - Daikin ATKC18RV2S Removal Procedure

Swing Motors

8. Swing Motors
Warning
Step
1. Remove the swing motor
for horizontal blades.
1 Remove the screw of
the swing motor.
2 Remove the swing
motor for horizontal
blades.
2. Remove the swing motor
for vertical blades.
1 Remove the swing shaft
on the right side.
2 Pull out the drain hose.
12
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Swing motor
for horizontal
blade
(R23356)
Swing shaft
(R11361)
Drain hose
(R11357)
Si041255EH
Points
Some models have no swing
motor for vertical blades.
Remove the swing shaft.
(1) Unfasten the hook.
(2) Pull out the swing shaft.
(R12896)
Be careful not to wet the
floor with the drained water.
Removal Procedure