Device Reset; Reference Standards - Vemer Dafne Wi-Fi User Manual

Perform a reset to delete the settings entered and restore the device to the factory
values (excluding the network settings for remote control which can be changed as
described on pages 18-19).
To reset:
1. from the home screen, press and hold the
configuration.
2. keep the and
3. when the display shows all the segments, keep the
appears .
Factory values:
Operation mode
Regulation type
Differential (on/off)
Band (proportional)
Period (proportional)
Antifreeze temperature OFF
NOTE: The factory values of the temperatures are shown on page 31
EU DECLARATION OF CONFORMITY
Vemer declares that the device complies with the EU directive 2014/53 / EU (RED)
with reference to the following standards:
EN 60730-2-7, EN 60730-2-9
ETSI EN 300 328, ETSI EN 301 489-1, ETSI EN 301 489-17
The full text of the EU declaration of conformity is available on the Internet
www.vemer.it

DEVICE RESET

flashes.
keys pressed at the same time until the display shows "
heating
(winter)
on/off
0.3 °C
0.5 °C
10 minutes
6 °C

REFERENCE STANDARDS

- 50 -
Dafne Wi-Fi Chronothermostat User Manual
key to access the menu
key pressed until
Adj. ADJ temperature
Min. settable temperature
Max. adjustable temperature
Hour meter operation
/
Automatic summer time change
Backlighting
Key lock password
".
0 °C
2 °C
50 °C
0 h
active
(according to EU rules)
active
active