Ec Declaration Of Conformity; Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita UR100D Instruction Manual

Nylon cutting head
NOTE: The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Take particular care and attention.
Only for EU countries Do not dispose of
electric equipment or battery pack together
with household waste material! In
observance of the European Directives, on
Waste Electric and Electronic Equipment
and Batteries and Accumulators and Waste
Batteries and Accumulators and their
implementation in accordance with national
laws, electric equipment and batteries and
battery pack(s) that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
a (m/s ) Uncertainty K
h,W 2
(m/s
0.1
2.5
Read instruction manual.
Danger;
The distance between the tool and
bystanders must be at least 15 m.

EC Declaration of Conformity

For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.

SAFETY WARNINGS

IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions
electric
serious
Save all warnings and
instructions for future reference.
1. Be familiar with the controls and proper use of
the equipment.
2. Cutting elements continue to rotate after the
motor is switched off.
3. Never allow children or people unfamiliar with
the instructions to use the machine. Local
16 ENGLISH
a (m/s ) Uncertainty K
h,W 2
2
)
2.5
be aware
thrown objects.
may result
shock, fire
injury.
2
(m/s )
0.5
of
in
and/or