Using WebLink to Set Up EtherNet/IP Communication
• WebLink - Setup - Gear Icon - Advanced Settings - Communications - Ethernet
Setting Item
EtherNet/IP
Ethernet/IP Byte
Swapping
When Byte Swapping is used, the output changes as follows.
Example: Where the character string of the read code is 0123
Byte Swapping: Enabled
Byte Swapping: Disabled
V430-F Series Autofocus Multicode Reader User Manual for Communication Settings
3 Controlling Operation and Data Output with Ethernet
Setting Value
•
•
Enabled
Enabled: EtherNet/IP connectivity is enabled on the code read-
•
er.
Disabled
•
Disabled: EtherNet/IP connectivity is disabled on the code
reader.
•
•
Enabled
Enabled:
•
Byte Swapping is enabled for the Read data.
Disabled
The Read data is stored in Decode Data in Little endian format.
This is used when the Endian of the CPU architecture is difer-
ent from that of the Read data.
•
Disabled:
Byte Swapping is disabled for the Read data.
The Read data is stored in Decode Data in Big endian format.
0011 0010 0011 0001 0011 0100 0011 0011
1
0
0011 0001 0011 0010 0011 0011 0011 0100
0
1
Description
3
2
2
3
3
3 - 7