Mercedes-Benz E-Class Coupe 2017 Owner's Manual page 338

Position jack 2 at jack support point 1.
#
Turn ratchet ring spanner 3
#
jack 2 sits completely on jack support point
1 and the base of the jack lies evenly on
the ground.
Continue to turn ratchet ring spanner
#
until the tyre is raised a maximum of 3 cm
off the ground.
Loosen and remove the wheel (
#
Removing a wheel
Requirement:
The vehicle is raised (
R
When changing a wheel, avoid applying any force
to the brake discs, since this could impair the
level of comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on
#
a dirty surface.
Unscrew the uppermost wheel bolt com‐
#
pletely.
clockwise until
3
page 335).
→
page 333).
→
#
#
#
#
Fitting a new wheel
Requirement:
R
Wheels and tyres 335
Screw centring pin 1 instead of the wheel
bolt into the threading.
Unscrew the remaining wheel bolts fully.
Remove the wheel.
Fit the new wheel ( page 335).
→
The wheel is removed ( page 335).
→