Mercedes-Benz E-Class Coupe 2017 Owner's Manual page 337

334 Wheels and tyres
Using the wheel spanner, loosen the wheel
#
bolts on the wheel you wish to change by
about one full turn. Do not unscrew the
screws completely.
Position of jack support points
& WARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at
the appropriate jacking point of the vehicle,
the jack could tip with the vehicle raised.
Only position the jack at the appropri‐
#
ate jacking point of the vehicle. The
base of the jack must be positioned ver‐
tically under the jacking point of the
vehicle.
* NOTE Vehicle damage from the jack
If you do not position the jack correctly at
the appropriate jack support point of the
vehicle, the jack could tip over with the vehi‐
cle raised.
The jack is designed exclusively for
#
jacking up the vehicle at the jack sup‐
port points.
Take the ratchet ring spanner out of the tyre-
#
change tool kit and place it on the hexagon
nut of the jack so that the letters AUF are
visible.