Mercedes-Benz E-Class Coupe 2017 Owner's Manual page 32

Always engage seat belt tongue
#
seat belt into seat belt buckle
responding seat.
Vehicles with PRE-SAFE ® : If the front seat belt
is not pulled tight across your body, the seat belt
adjustment may automatically apply a certain
tightening force. Do not hold the seat belt tightly
while it is adjusting. You can activate and deacti‐
vate the seat belt adjustment function using the
multimedia system.
* NOTE Deployment of the seat belt ten‐
sioner when the front passenger seat is
unoccupied
If the seat belt tongue is engaged in the seat
belt buckle of the front passenger seat and
the front passenger seat is unoccupied, the
seat belt tensioner may deploy in the event
of an accident.
Only one person should use each seat
#
belt at any one time.
Releasing the seat belts
2 of the
1 of the cor‐
Press the release button in the seat belt
#
buckle and guide the seat belt back with the
seat belt tongue.
Occupant safety
Activating or deactivating seat belt adjust‐
ment via the multimedia system
Multimedia system:
Vehicle Vehicle settings
, .
adjustment
Activate or deactivate the function.
#
Seat belt warning for the driver and front
passenger
The ü seat belt warning lamp in the Instru‐
ment Display is a reminder that all vehicle occu‐
pants must wear their seat belts correctly.
In addition, an acoustic warning tone may sound.
As soon as the driver and front passenger fasten
their seat belts, the seat belt warning goes out.
Rear seat belt status display
The rear seat belt status display is only available
for certain countries.
29
Belt
.