Table of Contents
Advertisement
2 INSTALLATION
MOUNTING THE WET SECTION UNIT
2.1
Figure 3 Dimensions to mount the Wet Section. (All dimensions in inches)
LOCATION AND LAYOUT
2.1.1
Mount the analyzer in a clean, vibration-free area avoiding direct radiant heat, sunlight and drafts. Avoid
areas containing chlorinating equipment. The 9031CX Sodium analyzer default design is comprised of
two separate sections (transmitter and wet section). The sensor unit can be mounted separately as long as
it is no more than 330 feet (100meters) from the transmitter unit.
Waltron User Manual 101-045-E.1
9031CX Sodium Analyzer
Installation
12
Advertisement
Table of Contents
Troubleshooting
