Controlling The Computer Player By Using The Evo Dac 3 Remote Control; Updating Evo Dac 3 Firmware; Controlling The Evo Dac 3 By The Bluetooth ® Interface - M2TECH MANUNTA User Manual

MANUNTA
EVO DAC 3
BY M2Tech
DIGITAL-TO-ANALOG CONVERTER
www.manunta-audio.com
REVISION P – JUNE 2022
RB
10. Controlling the Computer Player by Using the Evo DAC 3
Remote Control
The USB interface of the Evo DAC 3 implements the HID protocol, which allows for sending
commands to the player running on the computer to which the Evo DAC 3 is connected.
This feature is very useful whenever the computer is placed close to an audio system,
therefore away from the user, who can now conveniently use the Evo DAC 3 remote
control.
Three keys are present on the remote control (Fig. 3) which allow to start, pause and stop
playback, as well as to skip to the next or previous track.
This feature is not available with all players nor with all operating systems, or with all
versions of a certain operating system. Therefore, it is up to the user to check whether or
not the chosen player and the operating system in use are HID ready.

11. Updating Evo DAC 3 Firmware

User may, if needed, update the firmware of the Evo DAC 3 USB interface. In case, please
contact Manunta by M2Tech support for details.
Other Evo DAC 3 controllers firmware can only be updated in-factory. Should Manunta BY
M2Tech launch a global call for update, please ask Manunta by M2Tech for instructions.
WARNING: never try to update the Evo DAC 3 USB controller's firmware using any
firmware found on the Internet! Unauthorized updates may lead to Evo DAC 3
misoperation and damages and will void warranty!
12. Controlling the Evo DAC 3 by the Bluetooth ® Interface
User can control the Evo DAC 3, as well as set all operative parameters, by any iOS and
Android smartphone thanks to the apps developed by Manunta by M2Tech which are
available for free on App Store and Google Play.
Please visit Google Play and App Store and search for M2Tech apps.
The following parameters can be set by the app. User can have a detail of each parameter
usage by tapping the parameter name on the app.
- Balance (0-6dB in 0.5dB steps);
- Front panel LED's on/auto off;
- LED's brightness level (dim);
- I2S input mclk (x1 or x1/2);
Copyright © 2022, M2Tech Srl
25