EVERSPRING AC301 User Manual page 3

Z-Wave Plus Info
Role Type Node Type
Slave Sleeping
Z-Wave Plus node
Listening
Association Command Class
Group
1
Version
Protocol Library 3 (Slave_Enhance_232_Library)
Protocol Version 6.04(6.81.03)
Manufacturer
Manufacturer ID Product Type
0x0060 0x0015
AGI (Association Group Information) Table
Group Profile Command Class & Command (List) N bytes
Battery Report,
Device Reset Locally Notification,
Notification Report
Sensor Multilevel Report
1 General
Thermostat Mode Report
Thermostat Setpoint Report
Protection Report
Clock Report
Notification
Event
The power is applied for the first time
Battery
Battery Report (value) Description
20~100 Battery Level %
0xFF Low Battery
Command Classes
The module supports Command Classes including...
 COMMAND_CLASS_ZWAVEPLUS_INFO_V2
 COMMAND_CLASS_ASSOCIATION_V2
 COMMAND_CLASS_ASSOCIATION_GRP_INFO
 COMMAND_CLASS_TRANSPORT_SERVICE_V2
 COMMAND_CLASS_VERSION_V3
 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
 COMMAND_CLASS_DEVICE_RESET_LOCALLY
 COMMAND_CLASS_POWERLEVEL
 COMMAND_CLASS_SECURITY
 COMMAND_CLASS_SECURITY_2
 COMMAND_CLASS_SUPERVISION
 COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
Installer Icon User Icon
Generic_Thermostat Generic_Thermostat
Max Node
1
Product ID
0x0001
Group Name(UTF-8)
Lifeline
Event
Event
Type Event Parameter
Parameter
Length
0x08 0x01 0x00
 COMMAND_CLASS_BATTERY
 COMMAND_CLASS_NOTIFICATION_V8
 COMMAND_CLASS_CONFIGURATION
 COMMAND_CLASS_SENSOR_MULTILEVEL
 COMMAND_CLASS_APPLICATION_STATUS
 COMMAND_CLASS_THERMOSTAT_MODE_V3
 COMMAND_CLASS_THERMOSTAT_SETPOINT_V3
 COMMAND_CLASS_PROTECTION
 COMMAND_CLASS_CLOCK
Basic Command Class
 Basic Get: Command to inquire the status of the device.
 Basic Report: Report the status of the device.
 Basic Set: Set the status of the device.
Basic Set Value Description
0x00 Energy Heat
0x0F Off
0xFF Heat
Z-Wave Configuration
1. Temperature Auto Report period setting
Parameter Number Size
1 2
2. Temperature offset for internal sensor
Parameter Number Size
2 1
3. Maximum Set point value
Parameter Number Size
3 1
4. Minimum Set point value
Parameter Number Size
4 1
5. Frost protection temperature
Parameter Number Size
5 1
6. Open window detect function
Parameter Number Size
6 1
7. Open window detect time period
Parameter Number Size
7 1
8. Open window detect temperature drop setting
Parameter Number Size
8 1
9. Open window detect delay time select
Parameter Number Size
9 1
Range Default
1~255 (min) 120mins
Range Default
-80~+80 Offsets the
℃
measured temperature by 00=0.0
℃ ℃
-8.0 ~+8.0
Range Default
℃ ℃
5~35 for 5 ~35 35=35
Range Default
℃ ℃
5~35 for 5 ~35 5=5
Range Default
℃ ℃
5~15 for 5 ~15 5=5℃
Range Default
0: Disable
1: Enable
Range Default
2~30 (min) 15mins
Range Default
℃ ℃
4=2 , 5=2.5
℃ ℃ ℃ 4=2
6= 3 , 7=3.5 , 8=4
Range Default
10~60 (min) 30mins
Offset
℃
℃
0
℃