Safety Features; Troubleshooting - Honeywell HZ-501 Owner's Manual

NEW HZ-501-502-503 OM
At this setting, the Thermostat will automatically turn the heater on and off to
maintain this selected temperature.
• Turn the Power knob to OFF and unplug the heater when you are finished
using it.
To operate the fan:
• Turn the Power knob to FAN and the Thermostat knob to its highest setting to
use the unit as an air circulator without heat.

SAFETY FEATURES

This heater is equipped with several devices and features for added protection.
• A high temperature safety control prevents overheating (HI limit).
• A back-up thermal circuit breaker.
• This heater is also equipped with motor thermal fuse that will shut down
the motor should it operate at a higher than normal temperature.
• This heater has a caution light. If it is illuminated, please refer to the
TROUBLESHOOTING section of this manual for further instruction.
• This heater has a specially designed plastic handle which is cool to the
touch and allows you to easily move your heater.

TROUBLESHOOTING

If your heater shuts off unexpectedly or fails to operate, one of your heater safety
features may have been activated to prevent overheating.
• Be sure it is plugged in and that the electrical outlet is working.
• Check your Thermostat setting. The unit may simply be off because you
have reached your desired heat setting.
• This heater has a caution light.
• DO NOT operate the heater while the caution light is on.
• If the caution light goes on, immediately turn the heater OFF and check
that no objects are on or touching the heater.
• If you find an obstruction, with the heater still in the OFF position and
unplugged carefully remove it.
• Wait at least 10 minutes for the heater to cool. Plug the heater back in
and restart as described in OPERATING INSTRUCTIONS.
7/8/05 3:35 PM Page 4
3