Table of Contents
Advertisement
Operating instructions
Save and end
When you have selected the desired setting, press
"Button with menu - LED" for 3 sec. This will save the
setting. You will then proceed automatically to level 1.
Ending without changes
Wait for timeout (30 s).
Standby
After 2 min without pressing the button with menu -
LED, its light and the status - LED light will switch off.
After an opening signal, the latch is retracted and an acoustic signal sounds for up to 3 sec.
If terminal 4 is continuously activated, an acoustic signal is emitted for 7 sec and then automatically switched off.
H47.ELEKS005EN-00
Electromechanical systems
A-opener 2.1
02.2019
11/18
11/18
Advertisement
Table of Contents
