Table of Contents
Advertisement
Electromechanical systems
A-opener 2.1
The three holding times
The three different holding times are designated by
three different arrows in these instructions.
Change to level 2 main menu
Press button (8 s).
Level 2 Main menu
The main menu, consisting of two menu items, is on
level 2.
When you press the button (1 sec), the menu items are
retrieved step by step.
The second colour of the LED changes with each step.
Each colour designates the retrieved menu item.
Change to Level 3 Adjustment area
If the desired menu item is retrieved, the setting range
of the menu item is opened by pressing the button (3
sec).
Level 3 Adjustment area
Using the example of the menu items "System ser-
vices"
:
K
In level 3, the LED starts to flash. The colour changes
between the basic colour of the selected menu item
and the colour of the position in the setting range that
was saved most recently.
This is the position of the default settings in case of
commissioning. The default settings are highlighted in
red in the tables. The default settings at pos. 4
be found in the system services menu
When you press the button (1 s), the setting options of
the menu item are retrieved step by step. The second
colour of the flashing LED changes with each step. The
second colour designates the position in the setting
range. The number of positions varies according to the
menu item. There are up to four items.
Item 1
K
Item 2
K
Item 3
K
Item 4
K
10/18
02.2019
.
White
Couple device
B
Black
Disconnect device
C
Orange
Log output
D
Violet
(Default settings)
H
Large arrow
black
= 8 sec
A
A
D
can
H
Operating instructions
Large arrow
Small arrow
grey
= 3 sec
= 1 sec
H47.ELEKS005EN-00
grey
K
K
H
Advertisement
Table of Contents
