Mac Clone - Tenda AP4 User Manual

300mbps wireless n access point

Table of Contents

5.2

MAC clone

This function is available only when the device works in WISP or Router mode.

5.2.1

Overview

If the device cannot access the internet after configuring internet settings, your ISP may have bound

your internet service account with the MAC address of your computer that was used to verify the

internet connectivity after you subscribed to the internet service. Therefore, only this computer can

access the internet with the account.

In this case, you need to clone the MAC address of this computer to the WAN port of this device for

internet access.

5.2.2

Cloning a MAC address

Select one of the following methods to clone the MAC address according to your networking

scenario.

Using the computer with the MAC address bound to your internet service for setup

If you use the computer with the MAC address bound to your internet service to set up the function,

perform the following steps:

Step 1

Connect the computer to the device.

Step 2

Step 3

Click Clone Local MAC Address.

Step 4

Click Save.

----End

Using a device without the MAC address bound your internet service for setup

If you use a device whose MAC address is not bound to your internet service to set up the function,

perform the following steps:

Step 1

Connect the device (such as a smart phone or tablet) to the device.

Step 2

Step 3

Enter the MAC address of the computer that can access the internet in the MAC Address

input box.

Table of Contents

Ap5