EZ-ACCESS PATHWAY Assembly Manual page 2

ATTENTION INSTALLER and END USER
•
For residential use only!
•
Maximum weight capacity is 1,000 lbs.; never exceed weight capacity.
•
Read this manual in its entirety, ensuring you understand all instructions and warnings prior to ramp
assembly and use.
•
Please read and become familiar with the 'MAINTENANCE AND SAFETY' section of this manual.
•
Fill out online warranty registration.
IMPORTANT SHIPPING INFORMATION
•
Immediately inspect for damage or missing parts. If damaged or missing parts are noted, DO NOT INSTALL
OR USE.
•
Each system is shipped with a packing list. Confirm all items are present before starting installation. Also
check for shipping damage immediately upon receipt and note any freight damage on freight bill while driver
is still present. Contact shipper right away with any freight damage concerns. In most cases, freight damage
claims will not be allowed unless noted on the freight bill. Pictures of damage before the unit is unpacked
can be very helpful.
TOOLS TYPICALLY REQUIRED
✓
1/2" SOCKET OR 1/2" WRENCH
✓
9/16" SOCKET OR 9/16" WRENCH
✓
5/16" SOCKET OR 5/16" WRENCH
✓
POWER DRILL
✓
#2 PHILLIPS SCREW DRIVE
✓
PLIERS
✓
1/8" DRILL BIT
✓
5/16" DRILL BIT
✓
5/32" ALLEN WRENCH
✓
3/16" ALLEN WRENCH
PATHWAY ® Aluminum Wheelchair Ramp Kit
✓
BOX KNIFE
✓
HAMMER
✓
LEVEL
✓
FILE
✓
RUBBER MALLET
✓
1/4" MASONRY DRILL BIT (IF INSTALLING TO CONCRETE)
✓
DIGGING TOOLS (IF AN OBSTACLE NEEDS TO BE REMOVED)
✓
HACKSAW
✓
25' TAPE MEASURE
✓
CONSTRUCTION ADHESIVE
Page 2 of 39
1