Setting The Lcd Contrast; Time Zone Setting; Daylight Saving Time (Dst) Setting - La Crosse Technology WS-9043U Instruction Manual

II. SETTING THE LCD CONTRAST
1. Press and hold the SET button for 3 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
Note: There are 8 LCD contrast levels to choose from—"Lcd 0" is the lightest, and "Lcd 7" is
the darkest.
3. Press and release the ALM/+ button to select the level you desire.
4. Press and release the SET button to confirm and advance to the Time Zone setting.
III. TIME ZONE SETTING
1. Press and hold the SET button for 3 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
3. Press and release the SET button again.
4. The time zone will flash in the DATE LCD.
5. Press and release the ALM/+ button to select your time zone.
Note: It is possible to select any time zone from –12 GMT to +12 GMT (for example to see the
time in another country).
TIME ZONES
GMT
Atlantic
EST; Eastern
CST; Central
MST; Mountain
PST; Pacific
ALA; Alaska
HAW Hawaii
;
6. Press and release the SET button to confirm and advance to the Daylight Saving Time setting.
IV. DAYLIGHT SAVING TIME (DST) SETTING
1. Press and hold the SET button for 3 seconds.
2. "LCD" will show in the TIME LCD and the number setting will flash.
3. Press and release the SET button twice.
4. "DST" will appear in the DATE LCD and either "ON" or "OFF" will flash in the TIME
LCD.
5. Press and release the ALM/+ button to select DST on or off.
0
-4
-5
-6
-7
-8
-9
-10
6