11. Press and release the "SET" button to confirm the
VI. Selecting °F OR °C
1. Press and hold the "SET" button for 2 seconds or
2. Press and release the "SET" button 9 times to reach
3. "°F" is the default setting and the temperatures
4. Press and release the "+" button to select °F to °C.
5. Press the "SET" button to confirm and to advance to
VII. Setting the LCD Contrast
1. Press and hold the "SET" button for 2 seconds, or
2. Press and release the "SET" key 10 times to reach
3. There are 8 LCD contrast levels to choose from—
4. Press and release the "+" button to toggle through
5. Press and release the "SET" button to confirm and
year and to advance to °F and °C selection (skip step
1 and 2 in section VI if continuing).
until "12h" or "24h" flashes.
the °F or °C setting mode.
(inside and remote) will be flashing.
the LCD setting (skip step 1 and 2 of section VII if
continuing).
until "12h" flashes.
the LCD contrast setting mode.
"Lcd 0" is the lightest, and "Lcd 7" is the darkest.
"Lcd 5" is the default setting.
the settings.
exit the programming mode.
13